Trim Saw

Manual Type Shaping Machine

Calibrating Machine/
Cabochone Making Machine

Faceting Machine

Beads drilling machine

Ultrasonic Drilling Machine

Cobalt Metal Powder

 
 
Ultrasonic drilling machines a method of brittle destruction by collision of abrasives which are forced against a work by an ultrasonically vibrated tool assisted by an appropriate clamping force. The tool vibration can be of amplitude approx. 40-80 microns with frequencies of 25 kHz, sufficient to perform effective machining. Abrasives may be carborundum, boron carbide or diamond powder depending upon each work. Rougher grits provide quicker chipping but it rougher finish, Abrasives are usually used in slurry (mixed with water).

SPECIFIC FEATURES:

1. Suitable for precise machining of any hard and brittle material; specifically drilling, stamping, cutting and engraving of glass, precious stone, porcelain, gems, semi conductor, ceramics and hard alloys.

2. Not only round but unsystematic maching can be done as the Ultrasonic drilling machining is longitudinally processed.

3. High accuracy and fine finished are obtained depending upon the tool accuracy and grit size.

4. Simple in operation even a beginner can operate the machine with ease.

5. 4mm thickness can be drilled in 10-15 seconds on an average.

6. Very low operative cost. Less than 4% weight loss in drilling on an average. Ultrasonic Drilling Machines have been developed in various models.


SPECIFICATION
Ultrasonic Unit : 25 Khz,50 W Auto Tuning
Transducers : Electrostrictive PZT
Power Required : Ac 220 V 50 Hz Approx. 100VA 
Max . Drilling thickness : 6 mm

ULTRASONIC DRILLING MACHINE (USD 25)
ULTRASONICDRILLINGMACHINES

( USD 25 )

SPECIFICATION
Ultrasonic Unit : 25khz
Transducers : ElectrostrictivePZT
Power Required : AC 220V, 50Hz.Approx. 250 VA
Max . Drilling thickness : 10 mm

ULTRASONIC DRILLING MACHINE (USD 100)
ULTRASONIC DRILLING MACHINE
( USD 100 )

SPECIFICATION
Ultrasonic Unit : 25 KHz 150 W ultra Tuning
Transducers : Electrostrictive PZT
Power Required : AC 220V, 50Hz.Approx. 250VA
Max . Drilling thickness : 25 mm

ULTRASONIC DRILLING MACHINE (USD 150)
ULTRASONICDRILLINGMACHINE
( USD 150 )

   
   

Web design & Website designing INDIA - Fullestop.com
Rajasthan Tools and Spares
email: rajtools8@gmail.com | rts@rajtools.com